basket

herh

Custom Patches Online..

admin

Custom Patches No Minimum Order – Netpropatches.Com

Sometimes embroidering directly onto a garment is impractical, impossible or simply ineffective. Creating your very own embroidered patches is a simple alternative for such situations. You can directly sew your design into organza fabric as opposed to a finished garment. These can then be cut out into patches and sewn onto just about anything. They’re easy to create and surprisingly beautiful, with results quite similar to their traditionally embroidered counterparts. And with this process of embroidery, you can precisely position without opening seams, embroidering over lumpy seam allowances or worrying about exact placement when hooping.

What you will need – Besides general machine embroidery supplies (high quality backing, embroidery design, thread, embroidery needles), you’ll need polyester organza to serve as being a base to stitch on. One additional item can help you make perfect appliques: a heat tool. This may become a wood-burning tool, a stencil cutter or a multi-purpose tool (available at most craft stores).

The heat tools have different tips, and you’ll probably find that the one using a very sharp point is easiest to handle. This tool will disappear excess organza round the outside the embroidery, leaving the outlines intact and providing a soft and pliable applique you can attach to just about everything. Keep a very damp sponge within your work area while melting the organza to wash the tip from the tool and take off any melted organza that might otherwise stain the embroidery thread

Designs – Almost any design can become a patch. Whenever you evaluate a design, look for open areas or any regions of straight stitching that may be troublesome. Resist the obvious believed to remove tile organza across the straight stitching. Straight stitching isn’t stable enough to stand up to wear and tear, and also the organza will eventually work its solution from under tile stitches. It’s also advisable to leave the organza inside the open work areas.

Organza is quite stable and stands up well to some heavy stitch count design. Dark colors will show through with light colored thread, so choose a neutral color organza that can work well with a lot of designs. Leave the organza inside the open parts of tile design to add dimension and stability.

Although an excellent base fabric for embroidered patches, organza still needs to be stabilized. Use either water-soluble backing or a professional-quality, tear-away backing. Attempt to match the backing for the garment fabric so the design will blend to the background. Usually one layer will suffice, however, if the stitch count warrants a heavier backing, use multiple layers. It will still provide a soft, pliable applique. Hoop the backing and organza together in a hoop big enough to accommodate the embroidered design.

Note: Slippery organza will likely be easier to hoop should you first adhere it towards the backing with a temporary spray adhesive.

After the design is stitched on the organza, take it out of the hoop, and gently remove excess backing from tile back. Remove all backing before melting the organza. The backing will leave a gummy residue on the heat tool and can mar the embroidery. Use tweezers to get rid of any backing caught in small areas. Although it’s generally not advised to clip the tlrreads on tile back of a design, clip any that may show on the front. Leave some thread tails that can be tucked behind the applique once you attach it towards the garment. Utilize the heat tool to get rid of excess organza from round the side of your design. This is actually the exact same technique used qawntn professionally manufactured custom embroidered patches.

Run the tool approximately 1/8″ from the design edges. Don’t get too close, as polyester embroidery threads will melt using this source of heat. Rayon embroidery thread can better withstand the temperature in the tool. Once the organza is melted, the applique boasts stable edges and secure outlines.

Attaching the patches you’ve created – Always use a thread color which fits the design outline. Then machine stitch appliques set up using a narrow zigzag. Or hand-sew to secure using small overcast stitches.

On sleeves or pant legs, the circumference will be the deciding factor based on how an applique is attached. For instance, on the featured garment, too-narrow sleeves prohibited machine-applied appliques. When attaching multiple appliques on one garment, utilize the same technique throughout for the best overall look. Once all the appliques have been in place, attach any desired trims and buttons.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top